Maybe you know this, but –
Rem Oil has a bad rep.
More specifically, people are complaining about it:
- Being too thin
- Evaporating easily
- Not Lubing Properly
That’s also why I had steered clear of Rem Oil until now…
Until one of the readers came to me with a review request.
So, I decided to take a closer look.
- What is is that people are complaining about?
- And is Rem Oil really as bad as people say?
But first, let’s get the following out of the way…
What is Rem Oil?
Rem oil is a superior lubricant for firearms. You use it to lubricate your guns, as well as to protect them from corrosion.
I underlined the word lubricant, because people keep comparing Rem Oil to different products:
Rem oil is not a solvent. Rem Oil is not a CLP.
It’s a lubricant – and it works different from CLP’s and solvents.
But most importantly…
It Gets The Job Done
Most gun oils work fine, if you use them according to instructions. Including Rem Oil.
Every top brand will be 99% good enough for your needs. Unless you are a competition shooter, or you have unusual weather conditions.
And while Rem Oil may not be the best gun oil on the market…
It gets the job done.
Now you’re probably wondering:
If Rem Oil’s so good then why does it have such a bad reputation?
I’m certain that the people complaining about Rem Oil are simply using it wrong. There’s no other explanation.
How To Use Rem Oil
Here’s how you use Rem Oil properly:
- Apply the oil
- Let it sit for a bit
- Wipe the oil off completely (Don’t leave a single drop hanging there)
You need to wipe everything off because Rem Oil is a surface treatment.
What this means, is that the only useful part of the oil is the one that sticks to the surface of your gun. Any Rem Oil NOT stuck to the surface is useless.
After proper application, the surface should appear dry. It shouldn’t have a “wax coating”. This may seem unnatural, but that’s the proper way to use this product. You’re basically seasoning the surface as you would do on an iron skillet.
By now you can probably guess that –
The problem that most people have with Rem Oil is that they put TOO MUCH OIL on their gun.
The oil that doesn’t soak in runs off the gun. That’s where the bad rep comes from – that Rem Oil is “runny”.
Rem Oil needs to soak because of how it’s made.
What’s Rem Oil Made Of: The Ingredients
Rem Oil has a mineral oil base. Same as most other gun oils.
What makes it different from some is the added Teflon. Teflon transforms into a super-thin film on your gun’s surfaces. The thin film decreases friction and acts as a barrier against corrosion.
The Teflon membrane sticks to the gun and can’t be wiped away.
It’s the protecting factor of Rem Oil. You won’t see it, but it’s there after treatment.
Rem Oil Performance
The real question is:
Is Rem Oil worth the money when compared to other gun oils?
Well, let’s start from the good.
One thing that Rem’s good for is Rust Protection. There was a comparison I read a few years ago.
Rem Oil received superior ratings for rust inhibition in comparison to Hoppes’s and Breakfree CLP.
The same test also ranked Rem Oil as #1 gun oil for extreme cold.
I’m talking about minus 20-30 degrees kind of cold. All other oils would gum up and slow the action down.
You’ll probably never shoot your gun under those conditions, but it’s still good to know.
Rem Oil Alternatives
Crosman RMCoil vs Rem Oil
From the specs alone, these two should be equally good.
Both are lubricants, and both are quite thin and runny. Rmcoil doesn’t have teflon in its formula, so I would pick Rem Oil over it.
Couldn’t find any proper comparison video, so let me know in the comments if you have anything.
Rem Oil vs. Hoppe’s #9
You can see that Hoppe’s No. 9 performs significantly better than Rem Oil when it comes to solvent capability.
Click the play button and see the comparison for yourself.
Side note: I’ve always liked the precision tip bottle of Hoppe’s 9. It makes the oil easy to use. You don’t get that with REM oil.
Rem Oil vs. Froglube
According to the video below, Rem Oil and Froglube perform about the same.
Get whichever is cheapest.
Rem Oil vs. Ballistol
Ballistol is generally regarded as better than Rem Oil.
They’re both mineral oils. But the difference is that:
Rem Oil doesn’t emulsify in water. It acts like a normal oil – you put it in the water, and sticks to the surface.
Ballistol emulsifies in water. It will spread out in water, and won’t rise back out on the surface. It becomes a part of the water.
So, Ballistol has an advantage. It remains on your gun after you clean out the water. Protecting your barrel from corrosion.
Bottom Line: Performance
Rem Oil performs best you use it to wipe down the outside surface of the gun. Even though there are better all-rounder gun oils out there, Rem Oil is one of the best for rust protection.
It’s not that good for lubing the moving parts inside the gun that get heated. For the insides of your gun, you’re better off sticking with a proper CLP (such as Ballistol) or solvent (Hoppe’s #9).
Now, the next bit might be just me, but…
As I’ve mentioned above, it’s normal for Rem Oil to ‘dry’ inside your gun.
I don’t know about you but… I want to know that there is a layer of something inside my gun when I’m shooting.
And that’s just not the case with Rem Oil.
In a nutshell, here’s what you’re getting with Rem Oil:
- Great friction coefficient score
- Dries on the surface (less dirt and debris on your gun)
- Corrosion protection – passes salt spray test according to Govt. requirements
- Helps remove powder carbon and fouling
- Low viscosity – soaks into small areas and metal pores
- Frequently Asked Questions
Frequently Asked Questions
Rem Oil On Wood
Can you use Rem Oil on wood?
No, you can’t use Rem Oil on wood. Be careful around the stock of your gun. What happens is that the oil will soak in and ruin the wood where it meets metal.
Gun oil will ruin the wood. Not at once. But over the years it will soak in and make the wood soft and punky.
It usually happens where the stock meets the receiver. First the wood gets a dark stain, and then it starts getting soft.
You have to be real careful to keep gun oil off your stock. It’s a common recommendation to store your firearm muzzle-down for that exact reason.
It keeps the gun oil from running into the stock.
Side note: Storing your firearms muzzle-down is a precaution. If your gun oil runs at all, then you’re using too much of it.
Rem Oil Aerosol vs. Wipes vs. Liquid
You can buy Rem Oil in the form of:
- Rem Oil Aerosol spray
All 3 contain the same teflon formula. The only difference is the form.
Rem Oil Spray
Aerosol spray is the most common.
It’s also the one that I used to spray the outside of my gun.
In my opinion, the spray is the easiest to use.
Liquid is the cheapest of the three. Straightforward to use – just put some drops on your gun and you’re set.
Be careful not to put too much.
Rem Oil Wipes
Rem Oil Pop Up Wipes are more convenient for field use. If you’re out hunting and need something to clean your firearms, these are great to keep in your shooting bag.
They’re easy to use – just wipe down your firearm with it. Down the barrel or on the surface – wherever it’s needed.
One pack comes with a dozen wipes or so. One wipe can clean more than one firearm. A common trick is to cut them in half to save money.
Note that the wipes are more expensive than the liquid and the spray.
Which ones should you get? It’s really a matter of preference. If you ask me, I’d say that the spray is the most versatile of the three. Can’t go wrong with the spray.
The Final Word
Rem Oil is alright. It’s not too bad, not too good either.
It gets the job done, but it’s too thin for:
- Any serious firing (say AR-15)
- Performance in hotter temperatures
Most importantly –
Rem Oil is inferior to other gun oils on the market.
So why settle for less?
I’ve used Hoppe’s #9 for years. It’s tried and proven for gun cleaning, removing powder and small amounts of copper residue.
I prefer to use Break-Free CLP for gun cleaning. It’s cheap and a large can will last you a long time.
For heavy duty stuff, Hoppe’s #9 has never failed me.
And only after the treatment, that’s when I wipe everything down with Rem Oil.
Let me know in the comments if I missed anything, or if anything needs to be added to the article.